Raleigh, North Carolina
Hydraulic Cylinder Repair in Raleigh, NC
We break your cylinder down, clean it, custom-measure the seals, order the exact seals it needs, and put the cylinder back together. A straightforward shop process, built to get your equipment back to work.
How we work
A clear process from drop-off to pickup
Every repair follows the same steps. We take the cylinder apart, clean it thoroughly, measure for the seals it actually needs, order those seals, and reassemble the cylinder with the new parts in place.
-
Break it down
We carefully disassemble the hydraulic cylinder so every internal part can be inspected and reached.
-
Clean it
Components are cleaned so leftover fluid, grit, and old seal material are not left behind in the rebuild.
-
Custom-measure the seals
We measure the seals your cylinder needs instead of guessing from a generic kit. The fit has to be right.
-
Order the exact seals
Once the measurements are done, we order the exact seals for that cylinder.
-
Put it back together
We reassemble the cylinder with the new seals so it’s ready to go back on your equipment.
Typical work
Who we serve
We typically work on hydraulic cylinders from the kinds of equipment listed below. If you have a cylinder and you’re not sure it fits, call and describe what you have — we’ll tell you whether we can help.
-
Construction
Cylinders from loaders, excavators, skid steers, and other job-site equipment.
-
Agriculture
Farm and implement cylinders that need a proper reseal, not a one-size-fits-all kit.
-
Trucking & dump trailers
Hoist and dump-trailer cylinders that have to hold and lift reliably.
-
Forklifts
Lift and tilt cylinders from warehouse and yard forklifts.
-
Log splitters
Splitter cylinders that have started to leak, drift, or lose power.
-
Industrial equipment
Cylinders from presses, lifts, and other plant or shop machinery.
The Triangle
Based in Raleigh, serving the surrounding area
Our shop is on Westgate Road in Raleigh. We welcome customers who can drop off and pick up cylinders from across the greater Raleigh–Durham area, including the communities below.
- Raleigh
- Durham
- Cary
- Apex
- Garner
- Wake Forest
- Morrisville
- Holly Springs
- Knightdale
- Fuquay-Varina
- Chapel Hill
- Clayton
Questions
Frequently asked questions
A few things customers often want to know before they drop off a cylinder.
A repair — usually a careful reseal after the cylinder is taken apart, cleaned, and measured — is often a practical alternative to buying a new cylinder, especially for larger or less-common sizes. If the barrel, rod, or another major part is badly damaged, replacement may be the better option. Bring the cylinder in and we’ll look it over and talk through what makes sense for that unit.
We break the cylinder down, clean it, custom-measure the seals, order the exact seals your cylinder needs, and put it back together with the new seals. If you have questions about a specific cylinder, call (984) 234-1450 and we can walk you through it.
The cylinder itself is the main thing. If you have the equipment make and model, any part numbers on the cylinder, or notes about how it failed (leaking, drifting, a bent rod, and so on), bring those too. They help us inspect the unit and order the right seals.
Turnaround depends on the condition of the cylinder and how quickly the correct seals arrive. We don’t give a standard time until we’ve inspected your cylinder and know what has to be ordered. Call (984) 234-1450 and we’ll give you a realistic timeline once we’ve had a look.
Placeholder: If you later want to publish a typical turnaround (for example, once seals are in hand), add it here. Do not invent a number until you have one you’re comfortable standing behind.
We typically see cylinders from construction and agricultural equipment, trucking and dump trailers, forklifts, log splitters, and other industrial machinery. If you’re unsure whether we can help with yours, call and describe it.
Yes. The shop is in Raleigh, and we welcome drop-offs from around the Triangle, including Durham, Cary, Wake Forest, Garner, Apex, and nearby communities. If you’re coming from farther out, call ahead so we can plan for your visit.
We’re open Monday through Friday, 7:30 AM to 5:00 PM, and closed Saturday and Sunday. The shop is at 6212 Westgate Road, Suite C, Raleigh, NC 27617 — the last door on the building.
Please call (984) 234-1450 before you head over so we can plan for your drop-off. We’re open Monday–Friday, 7:30 AM–5:00 PM.
Placeholder: Update this answer if you have a set walk-in or appointment policy.
Get in touch
Request a quote or drop off a cylinder
The fastest way to reach us is by phone. You can also use the form below. Until a business email is connected, we’ll ask you to follow up by calling so nothing is missed.
- Phone
- (984) 234-1450
- raleighcylinderrepair@gmail.com
- Address
-
Hydraulic Cylinder Repair and Rebuilds
6212 Westgate Road, Suite C
Raleigh, NC 27617 - Hours
-
Monday–Friday, 7:30 AM–5:00 PM
Closed Saturday and Sunday
Directions: we’re the last door on the building.